Download Print this page

Panasonic Omnivision PV-DM2799 Operating Instructions Manual page 10

Tv/dvd/vcr combination
Hide thumbs Also See for Omnivision PV-DM2799:

Advertisement

I
:i
• Unit ...) Speaker
At first, be sure to slide the SPEAKER Switch to =EXT."
The unit speaker(s) can be turned off to enjoy external
audio sound,
Please note:
• Makesureconnected external s peakers are as follows:
Impedance: 8 _
AudioInput: over3 W
Unit
×
Speaker
Speaker
• Unit --)Amplifier
--) Speaker
Do the "Speaker
ON/OFF
system" steps on page 35,
and select "OFF:".
Unit
Speaker
r
Amplifier
Speaker
I_lf'Check
list before you begin.
[]
Turn down the volume, then turn this unit, as well
as other equipment to be connected, off before
proceeding with connection.
[]
Do not block ventilation holes of any of the
equipment and arrange them so that air can
circulate freely.
[]
Read through the instructions before connecting
other equipment.
[]
Ensure that you observe the color coding when
connecting audio and video cables.
Enjoying digital audio output from
the digital audio output connector
Notes on audio output from the optical/
coaxial digital audio output connector
Disc
Sound
Optical/coaxial
recording
digital audio output
format
from connector
DVD
Dolby
Dolby Digital bitstream
Digital
(2-5.1 ch) or PCM (2ch)
(AC-3)
(48 kHz/16 bit).1
Linear PCM
Linear PCM (2ch)
48/96 kHz
(48 kHz sampling/16 bit
16/20/24 bit
only)*= or no output.1
idts
Bitstream or no output*_
Video
MPEG 1
PCM
CD
(44,1 kHz sampling)
CD
Linear PCM
Linear PCM
(44.1 kHz sampling)
"1
The type of audio output from the connector
can be selected by the DVD initial settings.
(See page 52.)
*2
Sound having 96 kHz sampling is converted
into 48 kHz sampling when it is output from the
units optical/coaxial digital audio output
connector.
For your refemnue:
• Dolby Digital (AC-3) is a digital sound
compression technique developed by the Dolby
Laboratories Licensing Corporation.
Supporting 5.1-channel surround sound, as well
as stereo (2-channel) SOUnd,this technique
• enables a large quantity of sound data to be
efficiently recorded on a disc.
• Uuear PCM is a signal recording format used If)
CDs. While COs are recorded in 44.1 kHz/16 bit,
DVDs are recorded in 48 kHz/16 bit up to 96 kHz/
24 bit.
• If you have a Dolby Pro Logic Surround decoder,
you will obtain the full benefit of Pro Logic from
the same DVD movies that provide full 5.1
channel Dctby Digital soundtrecks, as well as
from tit_es with the Dolby Surround mark.
Manufactured under license from Dolby
Laboratories. "Dolby', =AC-3", "Pro LOgic"and
the deuble-D symbol are trademarks of Dufby
laboratories.
Confidential Unpublished Works. O 1992-1997
Dolby laboratories,
Inc. All fights reserved,

Advertisement

loading