Advertisement
The following are possible broadcast types with their accompanying on-
screen displays, The signal being received is indicated with an
"i" mark whi{e the selected audio mode is indicated with an arrow. To
change the audio mode for these broadcasts, follow the "Select Audio
Mode for TV Viewing" section (below.)
Display
the broadcast
signal
being received.
Press DISPLAY.
i_TERE0
t
0€
•0: '
4
MTS Stereo and SAP broadcast
Multi-channel Television Sound Stereo
(main language) and Secoodarj Audio
Program (sub language) broadcasts are
both being received simultaneously.
Select the STEREO or SAP audio mode.
MTS Stereo broadcast
Multi-channel Television Sound Stereo
broadcast. Select STEREO audio mode.
• If stereo broadcastis weak andthe display
flickers,select MONO audiomodefor
possiblybetterresults.
SAP broadcast
SecondaryAudio Program (sub language.)
Select SAP audio modefor the sublanguage,
MQNO broadcast
Normal monauralsound broadcast.
I
Equipped with _6='-TVNoise Reduction I
fortrue MTS reproduction.
I
dl=x'-TV Noise Reduction is required for I
good stereo separation and audio fidelity,
dbx" is a registered trademark, and is
icensed by d6x = Technoogy Licensing.
AUDIO
< Example >
I
Press
AUDIO
I
y
I Press AUDIO to select the desired
audio mode as described above.
(Arrow shows selection.)
• Each press of AUDIO will change the audio
mode as shown below.
• "SAP" is selected with first press of AUDIO.
Press
AUDIO
Press
AUDIO
_'
15
Advertisement
