Using Vcr Buttons - Panasonic Omnivision PVQ-V200 Operating Instructions Manual

You can set up to 8 programs to be recorded while you are away.
1
2
3
dl+ldZll_OI',e!,_
4
1 Display menu• [ (_ Display program
A _ Press ACTION.* O screen.
__ O 1) Press PROG.*
2) Go to step 4.
You can also set up using. • If a program is already in memory,
VCR buttons. See the bor[om press &V and • to select an
right of this page. unused program number.
MENU
SET CLOCK
SET UP CHANNEL
IDIOMA/LANGUE:ENGLISH
VCR'S OUTPUTCH :3
SELECT:A • KEY
SET :• KEY
END :ACTION KEY
Display SET UP FEATURE.
1) Press •Y to select.
=
,_/:_ = 2) Press • to display.
SET UP FEATURE
SET :• KEY
END :ACTION KEY
Display Program screen.
r 1) Press • to display.
l=_ • If a program is already in
• " memory, press AV and
• to select an unused
program number,
SiP
SELECT:& • KEY
SET :• KEY
END :PROG/ACTION KEY
Set the recording DATE.
1 1) Press Ay to select.
_ (._._ = 2) Press • or < to set.
"_-'_'_' | 1-31 = One time
_- | • DAILY = MON-FRI
• • WEEKLY = Same time
once a week
E_ (,_8-9 ........ 31-- 1 -- 2 ..... 6"_ I Repeat step 4 to set:
Today-- 7 SELECTA I• Selection Order DAILY start time, stop time Channel
k_iWEEKLY. WEEKLY WEEKLY/_.,/ (or LINE for outside source),
tape speed (SP, LP, SLP).
-- (SAT) .....
(MON) --
(SUN)
I_'Check list before you begin.
[] All connections are made.
(See pages 4-5.)
[] TV and VCR are plugged in and turned o_
[] VCR/TV selector is set to "VCR."
[] Clock is set to correct time.
[] Record tab in place. (See page 24.)
[] Remote in VCR mode.
POWER
SELECT/
1
SET
• :PLAY
• :STOP
• :REW
• :FF
1
PROG
ACTION
5
6
4 --
CANCEL:ADD/OLT KEY
SELECT 1-8:A • KEY
ENTER :, KEY
END :PROG/ACTION KEY
End the program.
oF _ 1) PressPROG
(or ACTION).
To Enter More Programs
Press •V to select, and • to
display a blank program number,
Then repeat steps 4 and 5,
2) Press PROG (or
ACTION)again to exit.
TIMER -
/ I \
Multi FunctionDisplay
Set the timer.
q Press POWER off.
[o When recording
(((_) _ I programs via a cable
I box, make sure the cable
box is left ON and tuned
to the desired channel.
-- Using AV4 • keys --
You can also operate the menu screen
using VCR buttons.
When menu screens are displayed, the
PLAY, STOP, REWIND, and FF buttons on
the VCR and remote function as ••• •
only with no tape inserted.
To exit the menu, repeat above with or
without tape inserted.
_. • : PLAY
i
.... ! :
en Remot_ OnVCR • : FF
To display menu using VCR buttons,
press CH • and CH • together.
12
• . ._ - .r_llliE_o]i_iiB-.]r_,1_r.,.T_['_i