Panasonic Omnivision PVQ-V200 Operating Instructions Manual page 25

Playing older or damaged tapes may eventually
cause video heads to become clogged.
Video Head Clog Sensor
During playback this
screen appears if VlOEO HEAOS MAY
clogging is detected. NEED C LEANING
TO remove screen, PLEASE I NSERT HEAD
CLEANING CASSETTE
press PLAY on the oRREFER TOMANUAL
remote or VCR.
END:PLAy KEY
• Use "dry" type head cleaning cassette only.
(Part No. NV-TCL3OPT is recommended.)
• Follow cleaning tape instructions carefully.
Excessive use of tape can shorten head life.
• If head clog symptoms persist, contact your
nearest Factory Service Center or authorized
Service Center. (See page 29.)
Power Source:
Power Consumption:
Video Signal:
Video Recording System:
Audio Track:
Tuner:
Broadcast Channels:
CABLE Channels:
120 V AC, 60 Hz
Power On
Approx, 18 watts
Power Off
Approx, 3.3 watts
EIA Standard NTSC color
2 rotary heads helical
scanning system
1 track (Normal)
VHF 2-13, UHF 14-69
Midband A through I (14-22)
Superband J through W (23-36)
Hyperband AA-EEE (37-64)
Lowband A-5-A-1 (95-99)
Special CABLE channel 5 A (01)
Ultraband 65-94, 100-125
Operating Temperature: 5 °C-40 °C (41 °F~104 °F)
Operating Humidity: 10 %-75 %
Weight: 2.9 kg (6.4 Ibs.)
Dimensions: 380 (W) x 93 (H) x 250 (D) mm
14-15/16" (W) x 3-11/16" (H) x
9-3/4" (ID)
Note: Designs and specifications are subject to change
without notice.
Use a soft cloth or dusting attachment of
your vacuum cleaner to dust your "VCR.
Remove dust from the ventilation holes on
the back sides and bottom of the cabinet.
Plastic surfaces are easily scratched and
can be marred by alcohol and various
solvents. Avoid excessive use of oil-based
furniture polishes since the materials used
in the cabinet will accumulate more dust.
We recommend using a nonabrasive,
antistatic cleaner and polisher.
Digital Auto Trackina
Continuously analyzes the signal and adjusts for
optimum picture quality.
M_a.nual Trackinq Control (to reduce picture
noiseJ
Use during Playback and Slow Motion mode to reduce
picture noise. Press CH (TRACKING) • / • buttons on
the remote control or on the VCR until the picture clears
up. To return to Auto Tracking, press POWER off, then
on again.
J
25