Table of Contents
Advertisement
You can set up to 8 programs to be recorded while you are away.
Display SET PROGRAM.
Press PROG.
elfa program is already in memory,
press
AY , and P to select an
unused program number.
1) Press AY to
select.
2) Press > or 4
to set.
* 1-31 = One time
. DAILY
= MON-FR]
+ WEEKLY SUN-SAT
= Same time once a
week
a
ly stant
stoe
cu] Set the recording DATE.
SELECT: Y KEY
SET
:» KEY
END
:PROG/ACTION KEY
Exam
le
Beer
2
6
Today's —7
SELECTA / Y Selection Order
DAILY
Repeat step 2 to set:
* start time, stop time
+ Channel (or LINE for outside source)
* Category [N/A (not applicable), SPORTS,
MOVIE, COMEDY, MUSIC, DRAMA]
e Speed (SP, LP, SLP)
DATE
staat
stop
ch)
Make the notes.
Face RI APANI
E] + If not wanted, go to step 4.
ODA
ABC
.
TODAY
CATEGORY : MOVIE
1) Press A to
begin.
2) Press AY to
select.
3) Press > or «
to set.
4) Press PROG
(or ACTION) to
end.
* Characters will change in the following order.
A=B=G 0. Z— BLANK—
— —4
EA
e da 2—ł—0—/—! el
Continued on the next page.
* If "PLEASE PREPARE FOR TIMER REC" appears and/or the
PROGRAM TIMER indicator flashes, check that a cassette with
record tab is loaded and the Combination VCR is in Stop mode.
e If the start times of two programs overlap, the lower numbered
program will have priority.
* If the start time for a Timer Recording comes up during a normal
recording or One Touch Recording (page 11}, the Timer Recording
will not be performed.
* If there is a power interruption of more than one minute, the
recording may not be performed or continue.
* It "INCOMPLETE" appears after all items have been set, check all
entries and make necessary corrections.
KA check list before you begin.
U All connections are made (see page 5.)
C] Your Combination VCR is plugged in.
C] The clock is set to correct time.
L] The tape is long enough.
(O The record tab is in place.
> :VOL UP
Timer Recording Using
Combination VCR Buttons
You can set the Timer Recording using
ACTION control on the Combination
VCR. (See page 7.)
oc CJE]
1 Press STOP/EJECT and REW
together without a tape to display
MAIN MENU.
2 Press AV +— to select "VCR"
and STOP/EJECT and REW
together to display SET UP VCR
screen.
8 Press AY to select "TIMER
PROGRAM" and + to display the
TIMER PROGRAM screen.
4 Repeat steps 2-5.
12
For assistance, call 1-800-211-PANA(7262)
Advertisement
Table of Contents
