Panasonic Omnivision PVQ-V200 Operating Instructions Manual page 7

['Case 2_ Clock Setup incomplete.
AUTO CLOCK SET
IS INCOMPLETE
PUSH ACTION TO SET CLOCK
DST:ON
Set the clock manually.
_10 11) Press ACTION.
SELECT:A • KEY
SET :_ KEY
END :ACTION KEY
r
DST:ON
m I{I] _lli_
SET :< _ KEY
START :ACTION KEY
k
2) Press•vto
_,_,_, select month.
3) Press•to set.
• Likewise, set date, year, time,
DST (Daylight Saving Time).
To Make Corrections,
repeatedly press • • to move to
error, then correct.
14) Press ACTION.
/ (Clock starts.)
|, To exit this mode,
k,,.J / press ACTION
J again.
O
• VCR calendar is accurately maintained to Dec. 31,
2096 11:59PM.
• Channel auto set selects normal TV or Cable
channels depending on your VCR hookup.
• To reset Language, Channels, Clock or VCR's
Output Channel see pages 22 and 23.
i F..J_CT O _U_V
Q @®
_CMSKtP _
5L0W
SELECT/
SET
• :PLAY
• :STOP
• :REW
• :FF
, ACTION
IMPORTANT NOTE FOR AUTO CLOCK SET
• Auto clock set is performed the first time the VCR is turned off each day. If used, a cable box must be left on and
tuned to the PBS channel at the time VCR power is turned off if you want auto clock set to be done.
• If used, a DSS receiver must be turned off for auto clock set.
• If Cable Box or DSS receiver is connected to VCR via Audio/Video jacks, an RF coaxial cable must also be
connected for auto cock set and channe auto set features to work.
-- Using AV< I_ keys
You can also operate the menu screen using VCR
buttons.
When menu screens are displayed, the PLAY, STOP,
REWIND, and FF builons on the VCR and remote
function as ••• • only with no tape inserted.
To exit the menu, repeat above with or without tape
inserted.
To display menu using VCR buttons, press CH •
and CH • together.
On Remote
On VCR
•:P_Y
•:STOP
•:REW
_:FF
'7