Regular Cleaning - LG DLEX2550 Series Owner's Manual

Hide thumbs Also See for DLEX2550 Series:
Table of Contents

Advertisement

Available languages

Available languages

T OUBIESttOO-I-ING
REGULAR CLEANING
WARN|NG"
[] To reduce the risk of fire, electric shock, or injury to persons when using this
appliance, follow basic precautions,
including the following:
• Unplug the dryer before cleaning
to avoid the risk of electric
shock. Failure to follow this warning can
cause serious injury, fire, electric shock, or death.
• Never use harsh chemicals,
abrasive
cleaners,
or solvents to clean the dryer.
They will damage the finish.
Cleaning
the Exterior
Proper care of your dryer can extend its life.
The outside of the machine can be cleaned with
warm water and a mild, nonabrasive household
detergent.
Immediately wipe off any spills with a soft,
damp cloth.
IMPORTANT: Do not use methylated spirits,
solvents, or similar products.
Never use steel wool or abrasive cleansers; they
can damage the surface.
Cleaning
the
Lint
Filter
Lint Filter
58
Cleaning
the
Interior
Wipe around the door opening and seal with a
soft, damp cloth to prevent lint and dust buildup
that could damage the door seal.
Clean the window with a soft cloth dampened
with warm water and a mild, nonabrasive
household detergent; then wipe dry.
The stainless steel drum can be cleaned with
a conventional
stainless steel cleaner, used
according to the manufacturer's
specifications.
Never use steel wool or abrasive cleansers; they
can scratch or damage the surface.
Cleaning
Around
and Under the Dryer
Vacuum lint and dust from around the dryer and
underneath it regularly. Vent ductwork
should be
checked for lint buildup and cleaned at least once
per year. If any noticeable reduction in airflow or
drying performance occurs, immediately check
ductwork for obstructions
and blockages.
Maintaining
Ductwork
Vent ductwork should be checked for lint
buildup and cleaned at least once per year. If
any noticeable reduction in airflow or drying
performance occurs, immediately check ductwork
for obstructions
and blockages. Contact a
qualified technician or service provider.
Always clean the lint filter after every cycle.
To clean, open the dryer door and pull the lint
filter straight up. Then:
O
Roll any lint off the filter with
your fingers, or
e
Vacuum the lint filter, or
.... f
]
O
If the lint filter has become
very dirty or clogged with
fabric softener, wash the lint
filter in warm, soapy water
and allow to dry thoroughly
before reinstalling.
NOTE: NEVER operate the dryer without the lint
filter in place.
NEVER operate the dryer with a wet lint filter.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents