Panasonic PT-43LC14 Operating Instructions Manual page 75

Programming The Remote
The Universal Remote Control can be programmed to operate many manufacturers' components, using the
component function buttons for VCR, DVD, DTV, RCVR, DBS, CBL or AUX. Follow the procedures for programming
your Remote Control with or without a code for the component.
\\\
Setting up the remote using the Number keys.
(When code is known}:
POWER
Confirm that the external component is plugged
and operating. Turn the component off.
Press OK and POWER together, for at least 5
seconds.
+
Press appropriate component button on the
Remote Control VCR, DVD, DTV, RCVR,
DBS/CBL or AUX (PVR or VCR2)
Enter the 3-digit component code using the
Remote Control number keys (0 ~ 9 buttons).
Press the Remote Control POWER to test the
component. If the procedure was successful, the
component will turn on.
Device Operates Default
TV TV (Panasonic Only) Panasonic Code
VCR VCR (Preset) Panasonic Code
DVD/CD DVD and CD (Preset) Panasonic Code
DBS STB & CBL STB (Preset) Panasonic DBS Code and Panasonic
DBS/CBL
and Cable (Preset) CABLE Code
RCVR Audio Receiver (Preset) Panasonic RCVR Code
Personal Video Recorders, Panasonic Personal Video Recorder
AUX
Cassette and VCR2 Code
DTV DTV (Panasonic Only) Panasonic Only
Notes:
• Determine the manufacturer of the component and look in the table for the code,
• If the component does not operate with the Remote Control, repeat the procedure using another code. (Some brands have
multiple codes), If an incorrect code is entered, or if the procedure takes longer than 30 seconds, the programming will fail,
75