Assembly - NordicTrack AudioStrider 800 User Manual

ASSEMBLY
Assembly requires two persons. Place all parts of the elliptical exerciser in a cleared area and remove the
packing materials. Do not dispose of the packing materials until assembly is completed.
Assembly requires the included hex keys and your own phillips screwdriver _-_-_ and rubber
mallet ___--i__-- __j) •
As you assemble the elliptical exerciser, use the drawings below to identify small parts. The number in parentheses
below each drawing is the key number of the part, from the PART LIST on pages 24 and 25. The number follow-
ing the parentheses is the quantity needed for assembly. Note: Some small parts may have been preassem-
bled. If a part is not in the parts bag, check to see if it has been preassembled.
\
M8.5 x 16mm x
M6 Split Washer M8 Split 1.5mm Washer M10 x 25mm M10 Curved Link Arm
(102)-8 Washer (101)-4 (103)-6 Washer (87)-2 Washer (99)-4 Spacer (74)-4
M4 x 16mm M6 x 35mm M6 x 62mm
Wave Washer Screw (116)-16 Screw (109)-4 Screw (108)-4
(100)-2
M8 x 15mm Button
Screw (106)-10
M8 x 20mm Button
Screw (107)-4
M8 x 25mm Button
Screw (110)-2
M10 x 20mm Button
Screw (111 )-2
While another person lifts the front of the
Frame (1), attach the Front Stabilizer (4) to the
Frame with two M10 x 93mm Button Screws
(82) and two M10 Curved Washers (99).
4