Printing The Fax Settings List; Setting Up A Fax Footer - Lexmark 7550 Series User Manual

Using the Dialing and Sending submenu
Your Fax Number
Your Fax Name
Cover Page
Color
Quality
Lighter/Darker
Dial Method
Redial Time
Redial Tries
Dial Prefix
Dial Volume
Scan
Max Send Speed
Auto Fax Conversion
Error Correction
Original Size
Enter your fax number using the keypad. This number is shown on the cover page of
outgoing faxes.
Enter the name of the printer using the keypad. This name is shown on the cover page of
outgoing faxes.
Choose whether or not to send a cover page with the outgoing fax.
Choose from values of Black & White or Color.
Choose a copy quality.
Adjust the brightness of a copy.
Choose a dial method.
Choose values for redialing time.
Choose the number of redial tries.
1 Press _ or _ until None appears, and then press _/. Now you can change the defaults
for the dial prefix.
2 Press _ or _ until create appears, and then press %/.Now you can create a dial prefix
if one is needed for an outside line.
Choose a volume of Off, Low, or High.
Choose to scan a document you want to fax before or after you dial.
Choose a bits per second (bps) number as the data speed for sending faxes.
Choose to set automatic fax conversion On or Off.
Choose between values of On or Off.
Specify the size of the original document.
Printing the Fax Settings List
1 From the Setup menu, press ,& orV repeatedly until Print Fax Settings List is highlighted.
2 Press _/.
3 Press _/to print a user default settings list which lists each fax setting in the printer, the value it is set to, and its
factory default.
Setting up a fax footer
1 From the control panel, press A or 'V' repeatedly until Fax is highlighted.
2 Press _.
3 Press A or Y repeatedly until the Fax setup submenu is highlighted.
4 Press _/.
5 Press A or Y repeatedly until the Fax Printing" submenu is highlighted.
129