Copying White Balance From D-0 To Presets D-1-D-4; Copying White Balance From A Photograph (D-1-D-4 Only) - Nikon D7000 User Manual

II Copying WhiteBalancefrom d-Oto Presetsd-1-d-4
Follow the steps below to copy a measured value for white balance from d-O to any
of the other presets (d-l-d-4).
2
Select PRE (Preset manual).
Press the MENU button and select White
balance in the shooting menu. Highlight
Preset manual and press I_.
MENU b utton
Select a destination.
Highlight the destination preset (d-1 to d-4)
and press 9_.
91_button
3
Copy d-O to the selected preset.
Highlight Copy d-O and press _). If
comment has been created for d-O (_ 129),
the comment will be copied to the comment
for the selected preset.
®
II Copying WhiteBalancefrom a Photograph(d-1-d-4 Only)
Copy a value for white balance from an existing image to a selected preset. Note that
existing values can not be copied to preset d-O.
2
Select PRE (Preset manual).
Highlight Preset manual in the white
balance menu and press I_.
Select a destination.
Highlight the destination preset (d-1 to d-4)
and press 9_.
91_button
126