Nikon D7000 User Manual page 13

This option isdisplayed onlywhen anEye-Fi memory c ard (available separately from
third-party s uppliers) isinserted i nthecamera. Choose E nable to upload
photographs toapreselected destination. Note thatpictures w illnotbeuploaded i f
signal strength isinsufficient.
Observe alllocal l aws concerning wireless devices a ndchoose D isable where
wireless devices areprohibited.
When anEye-Fi card isinserted, itsstatus i sindicated b yanicon
intheinformation display:
• _: Eye-Fi upload disabled.
• _: Eye-Fi upload enabled b utnopictures a vailable forupload.
• _ (static): Eye-Fi upload enabled; waiting tobegin upload.
• _ (animated): Eye-Fi upload enabled; uploading d ata.
• _: Error- camera c annotcontrol E ye-Fi card.Ifablinking C
R,-d appears in the
control panel or viewfinder, refer to page 307; if this indicator is not displayed,
pictures can be taken normally but you may be unable to change Eye-Fi settings.
[I_ Eye-Fi Cards
Eye-Fi cards may emit wireless signals when Disable is selected. Ira warning is displayed in
the monitor (_ 307), turn the camera offand remove the card.
See the manual provided with the Eye-Fi card, and direct any inquiries to the manufacturer.
The camera can be used to turn Eye-Fi cards on and off, but may not support other Eye-Fi
functions.
[] Supported Eye-Fi Cards
As of June 2010, the following Eye-Fi cards can be used: 2 GB SD cards in the Share, Home,
and Explore product categories, 4 GB SDHC cards in the Anniversary, Share Video, Explore
Video, and Connect X2 product categories, and 8 GB SDHC cards in the Pro X2 and
Explore X2 product categories. Eye-Fi cards are for use only in the country of purchase. Be
sure the Eye-Fi card firmware has been updated to the latest version.
View the current camera firmware version.
247