1 sliding-plate lever
2 floppy drive
9. Attach the power and data cables to the floppy drive.
10. Connect the other end of the data cable to the system board connector labeled "DSKT." To locate the system board connector, see
Components.
1 data cable
2 power cable
3 floppy-drive system board connector (DSKT)
11. Check all cable connections, and fold cables out of the way to allow for airflow between the fan and cooling vents.
12. Reinstall the drive panel (see
13. Ensure that all connectors are properly cabled and firmly seated.
14. Replace the computer cover (see
NOTICE:
To connect a network cable, first plug the cable in to the network port or device and then plug it in to the computer.
15. Connect your computer and devices to their electrical outlets, and turn them on.
See the documentation that came with the drive for instructions on installing any software required for drive operation.
16. Enter the system setup program (see
17. Verify that your computer works correctly by running the Dell Diagnostics. See
Replacing the Drive
Panel).
Replacing the Computer
Cover).
System
Setup) and select the appropriate Diskette Drive option.
Dell
Diagnostics.
System Board