Dell Precision 490 Desktop User Manual page 32

1 system battery
2 positive side of battery connector
3 battery socket tab
4 battery socket
NOTICE: To avoid damage to the battery connector, you must firmly support the connector while replacing the battery.
8. Support the battery connector by pressing down firmly on the positive side of the connector.
9. Hold the battery with the "+" facing up, and slide it under the securing tabs at the positive side of the connector.
10. Press the battery straight down into the connector until it snaps into place.
11. Replace the computer cover (see
NOTICE: To connect a network cable, first plug the cable into the network device and then plug it into the computer.
12. Connect your computer and devices to electrical outlets, and turn them on.
13. Enter the system setup program (see
14. Properly dispose of the old battery. For more information, see your Product Information Guide.
Back to Contents Page
Replacing the Computer Cover).
System Setup) and restore the settings that you recorded in step 1.