Dell Precision 490 Desktop User Manual page 132

1 computer cover
2 computer base
NOTICE: To connect a network cable, first plug the cable into the network port or device and then plug it into the computer.
4. Connect your computer and devices to electrical outlets, and turn them on.
5. After you open and close the cover, the chassis intrusion detector, if enabled, causes the following message to appear on the screen at the next
computer start-up:
ALERT! Cover was previously removed.
6. Reset the chassis intrusion detector by changing Intrusion Alert to Enabled or Enabled-Silent. See
7. If a setup password has been assigned by someone else, contact your network administrator for information on resetting the chassis intrusion detector.
Back to Contents Page
Resetting the Chassis Intrusion Detector.