McAfee SMEFCE-AI-DA - Email Security Service Inbound Administration Manual page 79

Email Protection Administrator Guide
The Sender Allow window is displayed.
4 Click Sender Deny.
The Sender Deny window is displayed.
5 In the Add Address field, type the address of a sender whose email should be denied
without filtering.
The following values are allowed in the list entries:
•
•
•
Note: CIDR notation is not allowed. Each IP address must be designated separately.
6 Click Add.
The address is added to the denied address box on the right.
7 Repeat steps 4 and 5 for each address you want to add.
In the
8
options:
•
•
9 Click Save.
You can save a copy of the list you created. See
Shield List
November 2012 Proprietary: Not for use or disclosure outside McAfee without written permission
Email addresses – Complete sender email address or partial address with
wildcards (for example, gsmith@domain.com or g*@domain.com)
Domain names – Complete domain name or partial name with wildcards (for
example, domain.com)
IP addresses – Complete IP address or partial address with wildcards (for
example, 123.123.12.3 or 123.123.12.*)
If the Sender is on the Sender Deny List section, select one of the following
Accept and silently discard the message – The email is accepted, but is
discarded without notification.
Deny delivery – The email is denied delivery.
.
Allow or Deny Email to or from Specific
Save a Copy of an Allow, Deny, or Recipient
71