Add Domains To The Msp Connection - McAfee SMEFCE-AI-DA - Email Security Service Inbound Administration Manual

Email Protection Administrator Guide

Add Domains to the MSP Connection

To assign the domain(s) for which should be sent to ConnectWise, perform the following
steps:
1 Click Account Management | Customers | MSP Connector.
2 Click Domains.
The Domains window is displayed.
3 To find one or a few domains out of a large number of domains, type the name of the
domain you wish to find in the Filter field.
4 Click Filter.
5 In the Available Domains column, check all domains whose information is to be
pushed to ConnectWise.
6 Click Add to move them to the Selected Domains column.
Note: Clicking Add All selects all domains, even those not displayed due to
pagination. Add All is disabled if there is an active filter for available domains.
November 2012 Proprietary: Not for use or disclosure outside McAfee without written permission
Administer MSP Connector
141