Usb Downstream Connector; Usb Ports; System Requirements - Dell SX2210WFP User Manual

Pin Number 4-pin Side of the connector
1 DMU
2 VCC
3
DPU
4
GND

USB Downstream Connector

Pin Number 4-Pin Side of the Signal Cable
1
VCC
2
DMD
3
DPD
4
GND

USB Ports

1 upstream - back
l
2 downstream at back & 2 downstream at bottom
l
NOTE: USB 2.0 functionality requires a USB 2.0-capable computer
NOTE: The monitor's USB interface works only when the monitor is on or in power save mode. If you turn off the monitor and then turn it on, the attached peripherals may take a few
to resume normal functionality.
Camera - MIC Specifications
Overview
The integrated USB camera and analog microphones allow you to take pictures, videos, and communicate with other computer users. The camera is located at
the top of the monitor and is fixed. However, the camera's software--Dell Webcam Software suite, provides limited panning abilities. When the camera is on,
the white light next to the camera turns on.
Lens Field of view
Focus mode
Focus area
Focusing distance (normal mode)
Image Sensor Active array size
Video specification
Video frame rate
Image flip
Digital zoom
Audio Specification Microphone type
Interface
Power Supply

System Requirements

The following are the minimum system requirements for the Dell Webcam Software Suite:
Intel® Pentium® 4 or AMD® equivalent processor running at 2.4 GHz or higher
l
(Recommended: Intel Pentium Core 2 Duo E4300 or AMD equivalent processor running at 2.8 GHz with Hyper-Threading enabled)
Microsoft® Windows® XP Service Pack 2 or Windows Vista®
l
256 MB RAM (2 GB RAM or higher recommended)
l
580 MB free hard disk space
l
66.2 degree +/- 5 %
Fixed Focus
37 cm~Infinity
1.100 mm
2.0 mega-pixel
1600 x 1200 (UXGA) - up to 10 frames per second
640 x 480 (VGA) and below - up to 30 frames per second
Horizontally
2x
Dual Microphone
USB 2.0 high Speed
3.3 volts +/- 5%