Setting Up The Monitor; Connecting Your Monitor; Connecting The Blue Vga Cable; Connecting The White Dvi Cable - Dell SX2210WFP User Manual

Back to Contents Page

Setting Up the Monitor

Dell™ SX2210 Flat Panel Monitor User's Guide
Connecting the Monitor
Organizing Your Cables
Attaching the Soundbar (Optional)

Connecting Your Monitor

CAUTION: Before you begin any of the procedures in this section, follow the
To connect your monitor to the computer:
1. Turn off your computer and disconnect the power cable.
2. Connect the HDMI cable, white (digital DVI-D), or blue (analog VGA) display connector cable to the corresponding video port on the back of your
computer. Do not use all the cables on the same computer. Use all of the cables only when they are connected to different computers with appropriate
video systems.

Connecting the Blue VGA Cable

Connecting the White DVI Cable

Connecting the HDMI Cable

Safety Instructions.