Connecting The Usb Cable; Organizing Your Cables - Dell SX2210WFP User Manual

NOTE: The graphics are used for the purpose of illustration only. Appearance of the computer may vary.

Connecting the USB Cable

After you have completed connecting the DVI/VGA/HDMI cable, follow the procedure below to connect the USB cable to the computer and complete your
monitor setup:
1. Connect the downstream USB port (cable supplied) to an appropriate USB port on your computer.
2. Connect USB peripherals to the upstream USB ports on the monitor.
3. Plug the power cables for your computer and monitor into a nearby outlet.
4. Turn on the monitor and the computer.
If your monitor displays an image, installation is complete. If it does not display an image, see
5. Use the cable holder on the monitor stand to organize the cables.

Organizing Your Cables

After attaching all necessary cables to your monitor and computer, (see
shown above.
Attaching the Soundbar (Optional)
NOTICE: Do not use with any device other than the Dell Soundbar.
To attach the soundbar:
1. Working from the back of the monitor, attach Soundbar by aligning the two slots with the two tabs along the bottom of the monitor.
Solving Problems.
Connecting Your Monitor) use the cable management slot to organize all cables as