Table of Contents
Advertisement
Quick Links
Download this manual
See also:
Setup Manual
Dell™ SX2210T Flat Panel Monitor User's Guide
About Your Monitor
Setting Up the Monitor
Operating the Monitor
Troubleshooting
Appendix
Notes, Notices, and Cautions
NOTE:
A NOTE indicates important information that helps you make better use of your computer.
NOTICE:
A NOTICE indicates either potential damage to hardware or loss of data and tells you how to avoid the problem.
CAUTION:
A CAUTION indicates a potential for property damage, personal injury, or death.
Information in this document is subject to change without notice.
© 2009 Dell Inc. All rights reserved.
Reproduction of these materials in any manner whatsoever without the written permission of Dell Inc. is strictly forbidden.
Trademarks used in this text: DELL and the DELL logo are trademarks of Dell Inc; Microsoft, Windows, a n d Windows Vista are either registered trademarks or trademarks of
Microsoft Corporation in the United States and/or other countries; ENERGY STAR is a registered trademark of the U.S. Environmental Protection Agency. As an ENERGY STAR partner,
Dell Inc. has determined that this product meets the ENERGY STAR guidelines for energy efficiency.
Other trademarks and trade names may be used in this document to refer to either the entities claiming the marks and names or their products. Dell Inc. disclaims any
proprietary interest in trademarks and trade names other than its own.
Model SX2210Tb
August 2009 Rev. A00
Advertisement
Table of Contents
Related Manuals for Dell D2201
Summary of Contents for Dell D2201
- Page 1 Dell Inc. has determined that this product meets the ENERGY STAR guidelines for energy efficiency. Other trademarks and trade names may be used in this document to refer to either the entities claiming the marks and names or their products. Dell Inc. disclaims any proprietary interest in trademarks and trade names other than its own.
-
Page 2: About Your Monitor
Back to Contents Page About Your Monitor Dell™ SX2210T Flat Panel Monitor User's Guide Package Contents Product Features Identifying Parts and Controls Monitor Specifications Universal Serial Bus (USB) Interface Plug and Play Capability Camera - MIC Specifications Maintenance Guidelines Package Contents Your monitor comes with all the items shown below. -
Page 3: Product Features
DVI cable USB up stream cable (enables USB ports, Webcam and touch function on the monitor) Documentation (Safety Information, Quick Start Guide, and CD) Cleaning cloth Product Features The SX2210T flat panel display has an active matrix, thin-film transistor (TFT), liquid crystal display (LCD). The monitor features include: ■... -
Page 4: Back View
Back view Back View with monitor stand Label Description Barcode serial number label To contact Dell for technical support. Security lock slot To help secure your monitor. Dell soundbar mounting brackets To attach the optional Dell Soundbar. USB downstream port To connect the USB cable. -
Page 5: Bottom View
Left view Right view Bottom View Bottom view Label Description DC power cord connector Audio Line-in Audio Line-out HDMI connector DVI connector VGA connector USB upstream connector USB downstream connector Monitor Specifications The following sections give you information about the various power management modes and pin assignments for various connectors of your monitor. Power Management Modes If you have VESA's compliance display card or software installed in your PC, the monitor can automatically reduce its power consumption when not in use. -
Page 6: Pin Assignments
Activate the computer and 'wake up' the monitor to gain access to the OSD. NOTE: This monitor is ENERGY STAR®-compliant. Zero power consumption in OFF mode can only be achieved by disconnecting the main cable from the power adapter. Pin Assignments VGA Connector 15-pin Side of the Connected Signal Cable Number Video-Red Video-Green Video-Blue Self-test GND-R GND-G GND-B Computer 5V... - Page 7 24-pin Side of the Connected Signal Number Cable TMDS RX2- TMDS RX2+ TMDS Ground Floating Floating DDC Clock DDC Data Floating TMDS RX1- TMDS RX1+ TMDS Ground Floating Floating +5V power Self test Hot Plug Detect TMDS RX0- TMDS RX0+ TMDS Ground Floating Floating TMDS Ground...
-
Page 8: Universal Serial Bus (Usb) Interface
Reserved (N.C. on device) DDC/CEC Ground +5V Power Hot Plug Detect Universal Serial Bus (USB) Interface This section gives you information about the USB ports that are available on the left side of your monitor. NOTE: This monitor supports High-Speed Certified USB 2.0 interface Transfer speed Data Rate Power Consumption... -
Page 9: System Requirements
Available USB 2.0 port or a USB 2.0 hub with external power supply Dell Webcam Software Suite The Dell Webcam Software Suite includes the following applications: Dell TouchCam Dell TouchCam enables convenient access to all exciting applications to enhance your Dell webcam experience. See Using the Camera for details Facial Recognition Software (FastAccess) ... -
Page 10: Touch Screen Specifications
Touch Screen Specifications Optical touch Touch Technology Touch Method Finger, stylus or any pointer. Stylus Diameter Minimum 7 mm Capabilities Mouse functionality—click, drag, double-click and right-click Resolution 1073 Mpixel +/-2.5 mm over 95% of touchable area (Microsoft Windows 7 Accuracy compliant) Touch Activation Force No pressure required... -
Page 11: Electrical Specifications
TTL level, SOG (Composite SYNC on green) 100 to 240 VAC/50 or 60 Hz + 3 Hz/1.6A (Max.) AC/DC Adaptor input voltage/frequency/current For use only with power supply DELL, DA65NS4-00. 120 V: 30 A (Max.) Inrush current 240 V: 60 A (Max.) Physical Characteristics 15-pin D-sub miniature, blue connector;... -
Page 12: Cleaning Your Monitor
Storage: 20% to 80% (non-condensing) Non-operating Shipping: 20% to 80% (non-condensing) Altitude Operating 3,657.60 m (12,000 ft) max Non-operating 12,192 m (40,000 ft) max 222.3 BTU/hour (maximum) Thermal dissipation 188.1 BTU/hour (typical) Maintenance Guidelines Cleaning Your Monitor CAUTION: Read and follow the safety instructions before cleaning the monitor. ... -
Page 13: Fcc Notices (U.s. Only) And Other Regulatory Information
Dell product catalog. Dell provides several online and telephone-based support and service options. Availability varies by country and product, and some services may not be available in your area. To contact Dell for sales, technical support, or customer service issues: Visit support.dell.com. -
Page 14: Setting Up Your Monitor
Back to Contents Page Setting Up Your Monitor Dell™ SX2210T Flat Panel Monitor If you have a Dell™ desktop or a Dell™ portable computer with internet access 1. Go to http://support.dell.com, enter your service tag, and download the latest driver for your graphics card. 2. After installing the drivers for your graphics Adapter, attempt to set the resolution to 1920 X 1080 again. NOTE: If you are unable to set the resolution to 1920 x 1080, please contact Dell™ to inquire about a graphics Adapter that supports these resolutions. Back to Contents Page... -
Page 15: If You Have A Non Dell™ Desktop, Portable Computer, Or Graphics Card
Back to Contents Page Setting Up Your Monitor Dell™ SX2210T Flat Panel Monitor If you have a non Dell™ desktop, portable computer, or graphics card 1. Right-click on the desktop and click Properties. 2. Select the Settings tab. 3. Select Advanced. 4. Identify your graphics controller supplier from the description at the top of the window (e.g. NVIDIA, ATI, Intel etc.). -
Page 16: Operating The Monitor
Back to Contents Page Operating the Monitor Dell™ SX2210T Flat Panel Monitor User's Guide Turn On the Monitor Using the Front Panel Controls Using the On-Screen Display (OSD) Menu Setting the Maximum Resolution Using the Dell Soundbar (Optional) Using the Tilt Using the Camera... -
Page 17: Using The On-Screen Display (Osd) Menu
Use the Exit button to exit on-screen display (OSD) from menu and sub-menus. Exit Front panel button Use the buttons on the side of the monitor to adjust the image settings. Front panel Button Description Use the Up button to adjust (increase ranges) items in the OSD menu. Use the Down button to adjust (decrease ranges) items in the OSD menu. Down ... - Page 18 Press the buttons to toggle between options in the Menu. As you move from one icon to another, the option name is highlighted. To select the highlighted item on the menu press the again. Press the buttons to select the desired parameter. Press the buttons to enter the slide bar and then use the ...
- Page 19 Auto Adjustment allows the monitor to self-adjust to the incoming video signal. After using Auto Adjustment, you can further tune your monitor by using the Pixel Clock (Coarse) and Phase (Fine) controls under Image Settings. ...
- Page 20 Back Press the button to go back to the main menu. Input Color Format Allows you to set the video input mode to: RGB: Select this option if your monitor is connected to a computer or DVD player using the HDMI cable or the HDMI to DVI adapter.
- Page 21 Display setting mode submenu Back Press the button to go back to the main menu. Horizontal position Use the buttons to adjust image left and right (min 0 ~ max 100). NOTE: When using DVI or HDMI source, the Horizontal Position setting is not available. ...
- Page 22 Audio Setting mode submenu Line Out Source Select the source of the audio input. Power Save Audio Allows you to turn on or off the power to the audio during the audio power save mode. Default is "On". On —...
- Page 23 DDC/CI DDC/CI (Display Data Channel/Command Interface) allows a software on your computer to adjust the monitor display settings like the brightness, color balance etc. Enable (Default): Optimizes the performance of your monitor and provides a better customer experience. Disable: Disables the DDC/CI option and the following message appears on the screen. ...
-
Page 24: Osd Warning Messages
Personalize Allows you to adjust shortcut button for: 1. Brightness & Contrast and 2. Preset Modes. OSD Warning Messages The following warning messages may appear on the screen to indicate that the monitor is out of synchronization. This means that the monitor cannot synchronize with the signal that it is receiving from the computer. Either the signal is too high or too low for the monitor to use. See Specifications for the Horizontal and Vertical frequency ranges addressable by this monitor. Recommended mode ... -
Page 25: Setting The Maximum Resolution
If you do not see 1920 x 1080 as an option, you may need to update your graphics driver. Depending on your computer, complete one of the following procedures: If you have a Dell desktop or portable computer: Go to support.dell.com, enter your service tag, and download the latest driver for your graphics card. ¡ If you are using a non-Dell computer (portable or desktop): Go to the support site for your computer and download the latest graphic drivers. -
Page 26: Using The Tilt
The Dell Soundbar is a stereo two channel system, mountable on Dell Flat Panel Displays. The Soundbar has a rotary volume and on/off control to adjust the overall system level, a LED for power indication, and two audio headset jacks. -
Page 27: Using The Camera
Windows Operating Systems) The Dell SX2210T webcam application media that shipped with your monitor, allows you to install the software and drivers for the integrated webcam. To install the Dell TouchCam Software: Insert the Dell "Drivers and Documentation" CD into the drive. - Page 28 When a video session ends, the TouchCam software will return to stand-alone mode. Setting up TouchCam in instant messaging programs The following describes the setup procedures for Windows Live Messenger. à 1. Click Tool Audio and video setup... 2. Select Dell Web Camera Filter.
- Page 29 Installing the Facial Recognition Software (FastAccess) (Windows Vista® and Window 7 Operating Systems Only) To install the Facial Recognition Software (FastAccess): Insert the Dell "Drivers and Documentation" CD into the drive. NOTE: Ensure that the USB cable is connected between the monitor and the computer.
-
Page 30: Using The Touch Screen
NOTE: Ensure that the USB cable is connected between the monitor and the computer. The Dell™ SX2210T Flat Panel Monitor is touch sensitive—you can control the computer simply by touching the screen. The touch screen allows you to interact with the computer in a similar way to a mouse as follows: Tap the screen once for a single mouse click. - Page 31 The page displays information and provides functions used for touch function technical support. [Restore factory defaults] button Sets the Touch Screen Tools settings to factory defaults. [Run diagnostics test] button Runs a diagnostic test on the touch screen and displays the result. For further information, see Diagnostic Test.
- Page 32 Back to Contents Page Setting Up Your Monitor Dell™ SX2210T Flat Panel Monitor Setting the display resolution to 1920 x 1080 (Maximum) For optimal display performance while using the Microsoft® Windows® operating systems, set the display resolution to 1920 x 1080 pixels by performing the following steps: 1.
- Page 33 Dell Inc. has determined that this product meets the ENERGY STAR guidelines for energy efficiency. Other trademarks and trade names may be used in this document to refer to either the entities claiming the marks and names or their products. Dell Inc. disclaims any proprietary interest in trademarks and trade names other than its own.
-
Page 34: Setting Up The Monitor
Back to Contents Page Setting Up the Monitor Dell™ SX2210T Flat Panel Monitor User's Guide Connecting the Monitor Organizing Your Cables Attaching the Soundbar (Optional) Connecting Your Monitor CAUTION: Before you begin any of the procedures in this section, follow the Safety Instructions. -
Page 35: Connecting The Usb Cable
NOTE: The graphics are used for the purpose of illustration only. Appearance of the computer may vary. Connecting the USB Cable After you have completed connecting the DVI/VGA/HDMI cable, follow the procedure below to connect the USB cable to the computer and complete your monitor setup: 1. - Page 36 NOTICE: Do not use with any device other than the Dell Soundbar. To attach the soundbar: Working from the back of the monitor, attach Soundbar by aligning the two slots with the two tabs along the bottom of the monitor. Slide the Soundbar to the left until it snaps into place.
-
Page 37: Built-In Diagnostics
Back to Contents Page Troubleshooting Dell™ SX2210T Flat Panel Monitor Self-Test Common Problems Product-Specific Problems Universal Serial Bus Specific Problems Dell Soundbar Problems Camera Problems Dell TouchCam Problems Facial Recognition (FastAccess) Problems Touch Screen Problems CAUTION: Before you begin any of the procedures in this section, follow the Safety Instructions. -
Page 38: Common Problems
4. Carefully inspect the screen for abnormalities. 5. Press the shortcut key 4 key on the front panel again. The color of the screen changes to red. 6. Inspect the display for any abnormalities. 7. Repeat steps 5 and 6 to inspect the display in green, blue, and white colored screens. The test is complete when the white screen appears. -
Page 39: Product-Specific Problems
Safety Related Visible signs of Do not perform any troubleshooting steps. Issues smoke or sparks Contact Dell immediately. Intermittent Monitor malfunctions Ensure that the video cable connecting the monitor to the computer is connected properly and is secure. Problems on & off Reset the monitor to Factory Settings. -
Page 40: Camera Problems
Troubleshooting Your Monitor. not working Verify if the camera is detected by Windows. and the LED is Reinstall the camera drives using the Dell SX2210T Webcam Resource CD. See Using the Camera for more information. Camera is not The camera is Remove and insert the USB cable. - Page 41 Unable to see my webcam video on Dell TouchCam Please close all applications that may use the webcam before you use Dell TouchCam, and check to see if it has been setup properly on your PC. You must choose "Dell Web Camera Filter" from your instant messaging software setting.
-
Page 42: Installation
2. Click the Finish button to save your changes NOTE: Depending on the type of instant messaging software you are using, the procedure to enable Dell TouchCam will be different. Please consult the help for the instant messaging software you are using and see the section on selecting webcam or something similar. -
Page 43: Calibrating The Touch Screen
Calibrating the Touch Screen With a clear desktop on the computer: 1. Run the Touch Screen Tools by clicking its icon in the system tray or Windows Control Panel. 2. Make sure the computer desktop is clear. 3. Click the [Calibrate] button on the Touch Screen Tools. The mouse pointer moves automatically to a position at the top left of the screen. 4.