Advertisement
u
.
.
Removethe fiat washerand hairpinclip from theend
of the chute directionalcontrol.
insertthe end of the chute directionalcontrolinto the
lowerbracketand securewith thefiat washerand hair-
pin clipjust removed.If necessary,the lowerbracket
can be adjusted.Referto ChuteBracketAdjustment.
on Page 13.
Insertthe shift leverthroughthe speedselectpanel
and secureto theshift springleverwith the two hex
head bolts and flangelock nuts that comeattachedto
the shift lever.
IMPORTANT: Priorto operatingyoursnowthrower,refer
to Auger ControlTeston page 11.Readand followall
instructionscarefullyand performall adjustmentsto verify
your snowthroweris operatingsafelyand properly.
Tire Pressure
Beforeoperating,checktire pressureand reducepres-
sure in bothtires to between15psi and 20 psi.
NOTE:If thetire pressureis not equalin bothtires,the
unit may nottravel in a straightpathand the shaveplate
may wearunevenly.
f
7
Setting
Up
IMPORTANT
Priorto operating your
snow thrower, refer
to Auger Control Test
on page 11. Read and
follow all instructions
carefully and perform
all adjustmentsto verify
your snow thrower is
operating safely and
properly.
Advertisement
