Advertisement
NOTE:References to right
or left sideof the snow
throwerare determined
from behindthe unitin the
operatingposition(standing
directlvbehindthe snow
thrower,facingthe handle
panel).
NOTE:Snowthrowersvary
by modelwith regardto
featuresand components.
Yoursnowthrowermay
NOT resemble,in detail.
i snowthrowersillustrated
in figures throughoutthis
i manual.
NOTE:Two replacement
augershearpinsare
includedwith this manual
(or stowedin the plastic
handlepanel}.Referto
i Augerson page 16for more
i informationregardingshear
i pin replacement.
1. Observethe lowerrear area of the snowthrowerto
be sure bothcablesare alignedwith rollerguides
beforepivotingthe handleupward.
2. Securethe handleby tighteningthe plasticwing
knoblocatedon boththe left and rightsidesof the
handle.Removeand discardany rubberbands,if
present.Theyare for packaging purposesonly.
3. Positionthe chute assemblyoverthe base.
4. Closethe flangekeepersto securethe chute
assemblyto the chute base.Theflangekeeperswill
click intoplacewhenproperlysecure.
NOTE:If the flangekeeperswill not easilyclick into
place,usethe palmof yourhand to applyswift,firm
pressureto the back of each.
6
Advertisement
