Download Print this page

MTD 31AS6ACD731 Operator's Manual page 13

2-stage snow thrower

Advertisement

Skid Shoes
The spacebetweenthe skid shoesand the groundcan
be adjusted.See Figure5.
• Forclose snow removalon a smoothsurface,raise
skid shoes higheron the augerhousing.
Use a middleor lowerpositionwhenthe areato be
clearedis uneven,such as a graveldriveway.
Toadjustthe skid shoes:
1. Loosenthe four hexnuts (two on each side)and
carriagebolts. Moveskid shoesto desiredposition.
2. Makecertainthe entirebottomsurfaceof skid shoeis
againsttheground to avoidunevenwearon the skid
shoes.
3. Retightennutsand boltssecurely.
Chute Bracket
Adjustment
If the spiralat the bottomof the chutedirectionalcontrol
isnot fully engagingwith the chuteassembly,thechute
bracketcan be adjusted.Todo so:
1. loosenthe two nutswhich securethe chute bracket
and repositionit slightly.See Figure6.
2. Retightening the nuts.
Tire Pressure
Beforeoperating,checktire pressureand reducepres-
sureto between15 psiand 20 psi.
If thetire pressureisnotequal in bothtires,the unit may
pull to one side or the other.
Figure 5
Figure 6
13
WARNING
Loosegravelcan be picked
up andthrown bythe auger,
causinginjuryto the operator
and bystandersand/or
damageto the snowthrower
and surroundingproperty.

Advertisement

loading

This manual is also suitable for:

31a-6bcd700C styleD style