Cisco CRS-1 - Carrier Routing System Router Hardware Installation Manual page 81

Carrier routing system sip and spa

Hide thumbs Also See for CRS-1 - Carrier Routing System Router:

Table of Contents

Chapter 5

Installing and Removing a SIP

SIP Installation and Removal

If this SIP is new, configure it for operation. For instructions, see Cisco IOS XR Interface and Hardware

Step 11

Component Configuration Guide for your software release. For command syntax, refer to Cisco IOS XR

Interface and Hardware Component Command Reference. Both publications are available at the

following URL:

http://www.cisco.com/univercd/cc/td/doc/product/ioxsoft/iox34/cgcr34/index.htm

Warning

Because invisible radiation may be emitted from the aperture of the port when no fiber cable is

connected, avoid exposure to radiation and do not stare into open apertures. Statement 125

Note

You can also keep the dust caps or covers on the laser optical bores to avoid radiation exposure.

Cisco CRS-1 Carrier Routing System SIP and SPA Hardware Installation Guide

5-7

OL-17439-01

Table of Contents

Troubleshooting