Cisco CRS-1 - Carrier Routing System Router Hardware Installation Manual page 16

Modular Optics Compatibility
The SPAs accept only the optics modules listed as supported in this document. A check is run every time
Note
an SFP or XFP module is inserted into a SPA, and only those modules that pass this check are usable.
Table 1-2
the Cisco CRS-1 router, and the first software release that supports these optics:
Table 1-2
SPA
1-Port Clear Channel OC-3 ATM SPA
3-Port Clear Channel OC-3 ATM SPA
1-Port Clear Channel OC-12 ATM SPA
4-Port OC-3c/STM-1 POS SPA
Cisco CRS-1 Carrier Routing System SIP and SPA Hardware Installation Guide
1-4
shows the types of optics modules that have been qualified for use with the SPAs supported on
SPA Optics Compatibility
Chapter 1
Qualified Optics Modules (Cisco Part
Numbers)
SFP-OC3-MM
•
SFP-OC3-SR
•
SFP-OC3-IR1
•
SFP-OC3-LR1
•
SFP-OC3-LR2
•
• SFP-OC3-MM
• SFP-OC3-SR
SFP-OC3-IR1
•
SFP-OC3-LR1
•
SFP-OC3-LR2
•
SFP-OC12-MM
•
SFP-OC12-SR
•
SFP-OC12-IR1
•
SFP-OC12-LR1
•
• SFP-OC12-LR2
SFP-OC3-MM
•
SFP-OC3-SR
•
SFP-OC3-IR1
•
SFP-OC3-LR1
•
SFP-OC3-LR2
•
SIP and SPA Product Overview
Minimum Cisco
IOS XR Software
Release 3.8.0
Release 3.7.0
Release 3.7.0
Release 3.2
OL-17439-01