1-Port And 3-Port Clear Channel Oc-3 Atm Spa Overview; 1-Port And 3-Port Clear Channel Oc-3 Atm Spa Leds - Cisco CRS-1 - Carrier Routing System Router Hardware Installation Manual

Carrier routing system sip and spa
Hide thumbs Also See for CRS-1 - Carrier Routing System Router:
Table of Contents

Advertisement

1-Port and 3-Port Clear Channel OC-3 ATM SPA Overview

Table 3-2
SPA Bandwidth Capacity (continued)
SPA
2-Port OC-48c/STM-16 POS/RPR SPA
4-Port OC-48c/STM-16 POS/RPR SPA
1-Port OC-192c/STM-64 POS/RPR XFP SPA
1-Port OC-192c/STM-64 POS/RPR VSR Optics SPA
5-Port Gigabit Ethernet SPA
8-Port Gigabit Ethernet SPA
10-Port Gigabit Ethernet SPA
1-Port 10-Gigabit Ethernet SPA
2-Port Clear Channel T3/E3 SPA
4-Port Clear Channel T3/E3 SPA
1. Total bandwidth value assumes eight OC-12c/STM-4 optics modules.
Note
If you oversubscribe the SIP, and the SPA subslot is locked in the failed state, refer to the
"Troubleshooting the SPA" section on page 7-2
1-Port and 3-Port Clear Channel OC-3 ATM SPA Overview
The 1-Port and 3-Port Clear Channel OC-3 ATM SPA is a single-height SPA that installs into one SIP
subslot. The Clear Channel OC-3 ATM SPA with small form-factor pluggable (SFP) optical transceiver
modules provides SONET and SDH network connectivity with a per-port bandwidth of 155.52 Mbps.
For more information about SPA bandwidth, see the "Bandwidth Oversubscription" section in this
chapter.
The following sections describe the 1-Port and 3-Port Clear Channel OC-3 ATM SPA:

1-Port and 3-Port Clear Channel OC-3 ATM SPA LEDs

The 1-Port and 3-Port Clear Channel OC-3 ATM SPA has three types of LEDs. There are two LEDs for
each port on the SPA, and one STATUS LED.
Clear Channel OC-3 ATM SPA.
Cisco CRS-1 Carrier Routing System SIP and SPA Hardware Installation Guide
3-4
1-Port and 3-Port Clear Channel OC-3 ATM SPA LEDs, page 3-4
1-Port and 3-Port Clear Channel OC-3 ATM SPA Interface Specifications, page 3-5
1-Port and 3-Port Clear Channel OC-3 ATM SPA Cables and Connectors, page 3-5
Chapter 3
Per-Port Bandwidth
Number of Ports
2.488 Gbps
2
2.488 Gbps
4
10 Gbps
1
10 Gbps
1
1 Gbps
5
1 Gbps
8
1 Gbps
10
10 Gbps
1
44.736 Mbps (T3)
2
34.368 Mbps (E3)
44.736 Mbps (T3)
4
34.368 Mbps (E3)
for instructions on how to enable the SPA.
Figure 3-2
shows an example of these LEDs on a 3-Port
Overview: Cisco CRS-1 Shared Port Adapters
Total Bandwidth
5 Gbps
10 Gbps
10 Gbps
10 Gbps
5 Gbps
8 Gbps
10 Gbps
10 Gbps
89.47 Mbps (T3)
68.74 Mbps (E3)
178.94 Mbps (T3)
137.47 Mbps (E3)
OL-17439-01

Advertisement

Table of Contents
loading

Table of Contents