Ipod/Iphone (Optional); Connecting An Ipod/Iphone; Setting The Ipod Control; Playback - Alpine CDE-HD149BT Manual

iPod/iPhone (optional)

Rotary encoder

/ENTER/OPTION


/ II
SOURCE
BAND/
ABC SEARCH

Connecting an iPod/iPhone

An iPod/iPhone can be connected to this unit by using the Interface
cable for iPod (included with iPod/iPhone). When this unit is connected
by using the cable, the controls on the iPod are not functional.
Notes
• Internet and telephone functions of the iPod touch or iPhone, etc., can
also be used while connected to this unit. However, using these functions
will stop or pause the playing songs. Stop using any applications or the
phone functions before going back to music playback on your device.
• If you connect an iPhone to this unit, it can be used as an iPod. If you
use iPhone as a hands-free phone, use the unit in which the
BLUETOOTH function is built.
About iPod/iPhone models usable with this unit
• Confirmed devices regarding Made for iPod. Correct function of
earlier versions cannot be guaranteed.
iPod touch (4th generation): Ver.5.1.1
iPod nano (6th generation): Ver.1.2
iPod touch (3rd generation): Ver.5.1.1
iPod nano (5th generation): Ver.1.0.2
iPod classic (160 GB) (Late 2009): Ver.2.0.4
iPod touch (2nd generation): Ver.4.2.1
iPod nano (4th generation): Ver.1.0.4
iPod classic (120 GB): Ver.2.0.1
iPod touch (1st generation): Ver.3.1.3
iPod nano (3rd generation): Ver.1.1.3
iPod classic (80 GB, 160 GB): Ver.1.1.2
• Confirmed devices regarding Made for iPhone. Correct function of
earlier versions cannot be guaranteed.
iPhone 4S: Ver.5.1.1
iPhone 4: Ver.5.1.1
iPhone 3GS: Ver.5.1.1
iPhone 3G: Ver.4.2.1
iPhone: Ver.3.1.3
• For clarity in identifying your model of iPod, please see Apple's own
document "Identifying iPod models" at
http://support.apple.com/kb/HT1353
• This unit does not support video playback from iPod/iPhone, even
using a video-compatible cable.
VIEW

1 5

2 4
Preset buttons
(1 through 6)

Setting the iPod Control

When an iPod/iPhone is connected, operate it from its own controls or
from the head unit.
1
Press and hold ENTEROPTION for at least 2 seconds
in the iPod mode.
The Option menu for iPod mode is activated.
2
Turn the Rotary encoder to select "APP Direct", and then
press ENTER.
The iPod control mode will switch between iPod Mode and HU
Mode.
HU Mode (HEAD UNIT):
Operate the iPod/iPhone via this unit.
iPod Mode:
Operate the iPod/iPhone using its own controls. When iPod is
selected, some functions will not be operable via the head unit.
Notes
• During HU Mode, you can switch to iPod Mode directly by pressing
BAND.
• Once the control mode is changed, this will set pause status, press 
to continue.
• Depending upon the iPod used, iPod control may not be selectable. Or,
if iPod is selected, operation must still be from the head unit.

Playback

1
Press VSOURCE to switch to the iPod mode.
2
Press  or  to select the desired song.
Pressing and holding  or  will fast backward/fast
forward the current song.
3
To pause playback, press .
Pressing  again will resume playback.
Notes
• A song playing on the iPod/iPhone while it is connected to this unit will
continue to play from where it was paused after disconnection.
• If you listen to an episode from a selected podcast or audiobook, the
episode can be changed by pressing 1  or  2.
• An episode may have several chapters. The chapter can be changed by
pressing  or .
37
-EN