Other Functions; Displaying The Text - Alpine CDE-HD149BT Manual

Low range
(Different from actual display)
Level adjusting
(0 to −12 dB)
Output frequency range
20 Hz
HPF cut-off
frequency
Notes
• HPF (high pass filter): Cuts the lower frequencies and allows the higher
frequencies to pass.
• LPF (low pass filter): Cuts the higher frequencies and allows the lower
frequencies to pass.
• Slope: The level change (in dB) for a frequency change of one octave.
• The higher the slope value, the steeper the slope becomes.
• Adjust the slope to Flat to bypass the HP or LP filters.
• Do not use a tweeter without the HPF on or set to a low frequency, as it
may cause damage to the speaker due to the low frequency content.
• You cannot adjust the crossover frequency higher than the HPF or lower
than the LPF.
• Adjustment should be made according to the recommended crossover
frequency of the connected speakers. Determine the recommended
crossover frequency of the speakers. Adjusting to a frequency range
outside that recommended may cause damage to the speakers.
For the recommended crossover frequencies of Alpine speakers, refer to
the respective Owner's Manual.
We are not responsible for damage or malfunction of speakers caused by
using the crossover outside the recommended value.
22
-EN
High range
Slope Flat
Slope adjusting
(Different from actual display)
LPF cut-off
frequency

Other Functions

Rotary encoder

/ENTER/OPTION
BAND
/ II
SOURCE

Displaying the Text

Text information, such as the disc name and the track name, will be
displayed if playing a CD text compatible disc. It is also possible to
display the folder name, the file name and the tag, etc. while playing
MP3/WMA/AAC files.
Press k VIEW.
The display will change every time the button is pressed.
Note
• When the Text Scroll is set to Manual (refer to "Scroll Setting (Text
Scroll)" on page 27), press and hold k VIEW for at least 2 seconds,
the current text will be scrolled one time (except Radio mode).
The display in HD Radio mode:
BAND+PRESET NO.
FREQUENCY
Artist Name *1
PTY (Program Type)
BAND+PRESET NO.
FREQUENCY
The display in CD mode:
Track No.
Elapsed Time
Calendar
Clock
VIEW
Station Name *1
Song Name *1
Calendar
Clock
Text (Disc Name) *2
Text (Track Name) *2
Track No.
Elapsed Time