Philips VRX262AT Owner's Manual page 35

Hide thumbs Also See for VRX262AT:
Table of Contents

Advertisement

Timer R ecording
With theVCR Plus+ Programming
System (cont'd) 3 5
4
Press the Number
I button
to record
in SP speed, press
the Number
2 button
to record
in LP speed, or press the
Number
3 button
to record
in SLP speed.
For details, see
pages 30 and 48.
You cannot use the (Tape) SPEED button at this time.Your
choice
will appear to the right of REC SPEED (but SP= I, LP=2, and SLP=3
will continue to flash).
oil
_ETIME P_OGP,AM
1
PROGRAM
I
CHANNEL
9
TIME ON
10:30 PM
TIME OFF
I 1:30 PM
REC SPEED
SIP
SP=I
LP=-2 SLP=3
START DATE
I0/I0/97
FRI.
END PUSH EXIT
5
Press the STATUS/EXIT
button.
PROGRAM WAS COM-
PLETED / PLEASETURN
OFFVCR
FORTIMER
RECORDING
should appear on the screen.After three seconds, the on-screen
display will disappear.
6
Press the POWER
button
to turn off the VCR power. The
Timer light will appear.TheTimer
light will flash if there is not a
tape in theVCR.
If the timer recording
will take place several hours or days from
now, you may use theVCR
until time for the recording.Just
turn
off the VCR a few minutes before the recording
starts.
The VCR must be turned
off for a timer
recording
to take
place. If you forget to turn off the VCR, PLEASE TURN OFF VCR
FOR TIMER RECORDING
flashes on your-IV
screen two minutes
before a timer recording
starts.You can remove the message by
pressing the CLEAR button.
The VCR must be off for a
timer recording
to take
place!
Make sure there is a
tape in theVCR.
6 4
5
C33_
G_ _
PHILIPS
.
J
• To quit the VCR Plus+ programming
system at any time, press the STA-
TUS/EXIT button. The display will
disappear from the TV screen.
• If the preset time for a timer
recording comes up during an OTR,
the OTR has priority.
• To stop a started timer recording,
press the STOP/EJECTbutton on
the VCR.
• If the power fails for more than one
minute, programmed timer record-
ings may be lost. Reset the clock "
before re-programming the timer
recordings.
• If you have a Cable Box, timer
recordings are programmed differ-
ently. See page eight for details.
See page 46 for more notes.

Advertisement

Table of Contents
loading

This manual is also suitable for:

Magnavox vrx262at

Table of Contents