Philips VRX262AT Owner's Manual page 18

EJECT Button
When playback is stopped, press to eject the tape.
POWER Button
Pressto turn theVCR on or off.
Number Buttons_
Use to select channels and on-screen menus and to program VCR
functions (such as setting the clock).
Channels I - 9 •
To select, press 0, then press the channel you want. For example,
to select channel 7, press 0, 7.
Channels 100 and above •
To select, press the + 100 button, then press the last two digits of
the channel you want. For example, to select channel I 17, press
the + 100 button, I, 7.
The +100 button will work only when selecting cable channels and
when CABLE'IV has been selected at the TUNER SET UP menu.
VCR PLUS+
Press to set aTimer Recording with theVCR Plus+ programming
system. Details are on pages 34-35.
(Tape) SPEED
Press to select the recording speed (SP,LP or SLP). Details are on
pages 25, 30, and 48.
PLAY
Press to play a tape.Also, press to release Slow, Search or Still
mode and to return to normal playback. Details are on page 40.
REW(ind)
When in Stop mode, press to rewind the tape at high speed.
When in Play mode, press to rewind the tape while the )icture
stays on-screen.
REC(ord)IOTR
Press once to start a recording (see page 25 for details).
Or, press three to 18 times to start a one touch recording (an
immediate recording, 30 minutes to eight hours long) of the chan-
nel you are watching (see page 27 for details).
MENU Button
Press to bring up the main menu display.
STATUSIEXIT Button
Press to see the on-screen
status display or
make
to
on-screen
status displays disappear. Details are on page 20. Press to exit on-
screen menus.
©