Specifications/Notes - Magnavox VRT344 Owner's Manual

35
Specifications/Notes -
Hooking Up Your VCR
If the reception on all channels is poor,
you may need to tune your TV set again.
: Timer Recording
• If the power fails for more than one
: minute, programmed timer recordings
i may be lost.
• • It is best to finish programming a timer
,: recording at least five minutes before
: the recording is scheduled to begin.
• • If, after programming a timer record-
! ing, you turn the VCR power off with-
: out putting a tape in the VCR, the
: Timer light will blink.
: • If the record tab on a tape is missing,
the VCR will eject the tape. The
: Timer light will blink.
• 12 PM is noon; 12 AM is midnight.
o
Power Failure
Timer recordings and the time may be
lost if the power fails for more than one
minute.
Satellite Hookups
• Watching one TV channel while
recording another may not be possible
if you have a satellite hookup.
• You may have to set your TV to chan-
nel 3 or 4, then make your channel
selections at the satellite converter
box.
• With many satellite hookups, if you
use accessory audio and video cables
to connect your VCR to your TV, you
will have to program your VCR to
accept line input. To enter Line Input
mode, press 0, 0. A/V IN will appear
on your TV screen briefly.
Line Input
If you accidentally enter Line Input
mode (A/V IN will appear on your TV
screen briefly), press the CHANNEL
(Up/Down) buttons or use the Number
buttons to select another channel.
Daylight-Saving Time
When automatic daylight saving time is
set, the clock time will change automati-
cally as follows: on the first Sunday in
April, 2:00 AM to 3:00 AM; on the last
Sunday in October, 2:00 AM to 1:00
AM.
• During the April time change, a timer
recording programmed to start between
2:00 AM and 2:59 AM will not record.
A timer recording programmed to end
between 2:00 AM and 2:59 AM will
end when the clock moves forward
(2:00 AM).
• During the October time change, a
recording cannot be started between
the second 1:00 AM and 1:59 AM.