Table of Contents
Advertisement
33
TV Code Setting
Your VCR remote control may be able to
operate your TV. If the remote control
doesn't operate your TV now, find your
brand of TV on the list at right, and follow
the steps below to program your remote
control accordingly.
1
Point the remote control at your TV and
press the TV button. Then, press the
POWER button. If your TV comes on, try
the other TV buttons (see pages 12 - 13for
details). If your TV doesn't come on, or if
the other buttons don't work, go to step 2.
2
Find the brand of your TV on the list
below, and remember the number to the
right of it.
3
Press and release the MUTE button.
4
Within thirty seconds after releasing the
MUTE button, press and release the TV
button.
5
Within thirty seconds after releasing the TV
button, press the Number buttons to enter
the cod_ for your TV brand. For example,
if you have a Zenith TV, press Number but-
tons 0, 5.
6
Try step 1 again. If the remote control works
your TV, you're finished. If the remote con-
trol still doesn't work your TV, repeat steps 2
- 5, using another code.
There is no
guarantee that the
remote control will
work your TV.
o,_
E] @ []11_
®@@1_
[]@
18
o
c=:_ o
00000
0
0
0 O:
1
iRemote
Control
i Try step 1 again. If
the remote
control
works your TV,
you're finished.
If
! the remote control
: still doesn't work
i your TV, repeat
! steps 2 - 5 using
: another code.
Press the TV button, then the POWER but-
ton, to see if the remote control operates
your TV. If it doesn't,
go to step 2.
4
Press and release the TV button.
Use the Number buttons to place your TV's
code (from the list below) in the remote
control.
3
Press the
MUTE button.
2
Find the brand
of your TV on
this list.
• Although
the remote control that comes with your VCR will work most
Magnavox
TVs, as well as many TVs sold under other brand names,
it is
possible
that the remote control will not operate your TV
• If you had to program
the remote control to operate
your TV here, whenever
you replace the batteries
in the remote control, you will have to program
the
remote control again.
Advertisement
Table of Contents
