KitchenAid KGRT507B Use And Care Manual page 23

. sing and Caring for Your Oven
In case of a power failure
Your oven will not work during a power
failure. Do not try to relight the oven. Wait
for the power to come back on before using
the oven again.
Using the control lock
The control lock prevents unwanted use of
the oven by disabling the control panel
command pads.
NOTES:
• Control lock is only available when oven
is not in use or control has not been set.
• Control lock will not disable the Timer.
• Set control lock when cleaning the control
panel to prevent oven from accidentally
turning on.
To lock or deactivate the control panel:
Open the door, then press and hold
the Control Lock pad (Number Pad 3) for
5 seconds. A single tone will sound and
"CONTROL LOCK i_1" will appear on
the display.
To unlock the control panel:
Open the door, then press and hold
the Control Lock pad (Number Pad 3) for
5 seconds. A single tone will sound after
5 seconds and "CONTROL LOCK IQI"
will disappear from the display.
Setting your range for the
Sabbath*
If you want to set your range to meet "no
work" requirements for the Sabbath, follow
these steps:
1. Turn the oven light and/or surface light (if
available) on or off (see pages 19 and 53).
These lights will stay turned on or off
(whichever you set) while in the Sabbath
mode. Opening the door will not turn on
the oven light if it is programmed
to be off.
* Star K certification pending. Full certifica-
tion by Star K is expected in early 1997.
Information is accurate as of 9/96.
.
,
4.
=
o
If a power failure occurs, the oven will
automatically run the Favorite Cycle set
in Convect Full Meal when power is back
on. To prevent the oven from running a
cook time and turning off at the end of
that time, set CONVECT FULL MEAL
with the bake cycle you want to use
during the Sabbath. (Be sure to set a
cook time of "0".) To set a favorite cycle:
A. Press CONVECT FULL MEAL.
B. Press BAKE.
C. Press Number Pads to enter the
temperature.
D. Press COOK TIME, followed by
Number Pad 0.
E. Press CONVECT FULL MEAL to
save the cycle.
F. Press CONVECT FULL MEAL again
to confirm that setting is programmed.
G. Press CANCEL/OFF.
NOTE: After a long power failure, you
may see the oven temperature increase
on the display. This will happen only
when the oven has cooled enough to
require preheating. The temperature
display will stop changing once the
Favorite Cycle's set temperature is
reached.
Press BAKE.
Press Number Pads to set the tempera-
ture you want.
Press START. Walt for the oven to
preheat. (A tone will sound when oven
is preheated.)
Open the door, then press and hold
Number Pad 6 for 5 seconds to go into
the Sabbath mode.
NOTE: Use the Sabbath mode with the
Bake function only.
23