KitchenAid KGRT507B Use And Care Manual page 17

_sing and Caring for Your Cooktop
Adjusting the height of top burner
flames
Carbon Monoxide Poisoning Hazard
Do not operate with a yellow flame.
Doing so can result in death,
heart attack, or convulsions.
The LO burner flame should be a steady
blue flame approximately 1/4inch high. It
can be adjusted using the adjustment screw
in the center of the valve stem. The valve
stem is located directly underneath the
control knob.
To adjust the flame height follow the
instructions below:
1. Remove the control knob. (If there is not
an adjustment screw underneath the knob
the flame height is not adjustable.)
2. Hold the valve stem with a pair of pliers.
The screw is located in the center of the
valve stem. Use a small flat head screw-
driver to turn the screw until the flame is
the proper size.
3. Replace the control knob.
4. Test the flame by turning the control from
"LO" to "HI," checking the flame at each
setting.
ment screw
t Valve stem
Low flame
High flame
LrLI LrLI Ln_l Ln_l
17