The Transverse Spool Holder
To ensure that ihe thread will unwind evenly from a crosswound spool, use
the transverse spool holder which is part of the standard equipment of your
machine.
To attach the spooi holder, slip position spring I over the vertical spooi pin,
the bent portion of the spring pointing toward you. Push the spool of thread
on spool pin 2. Press the position spring together, and push pin 2 into the spring
slot. With the spring pressed together, adjust its position on the vertical spool
pin, as required. When you release the spring, the transverse pin will be held
in place firmly. Pass the thread through eyelet 3, and thread the machine as
instructed.
R
6533
53