R 7999
If you want to sew a few wide zigzag stitches while the machine is set for straight
stitching (A on 0), merely press down the finger-tip control. When the lever is
released, the machine resumes straight stitching automatically.
To sew longer zigzag seams, turn dial A to desired stitch width (indicated by
numbers I to 4).
When dial A is set between
1/2
and 2, you can double the stitch width by depress
ing the finger-tip control (important for buttonholing and fancy stitching).
When you push the control up, the machine will sew straight, regardless of the
stitch width set (ideal for tying off zigzag seams).
Lever B changes the position of the needle in the needle plate slot. Thus the stitch
ing can be moved from the center to the left or right of the slot, as desired.
Dial G lengthens zigzag stitches
or packs them more closely to
gether (satin stitch).
The position of lever B (left, center, right) mdi
cafes the position of the needle in the needle plate
slot.
cp cip
7
R7995