t1heain
9
Place spool of thread on spool pin I and lead thread end through
both thread retainer openings 2 (see illustration opposite).
Lead thread clockwise around tension and pull it between any two of
the tension discs 3.
Bring take-up lever 4 as high as it will go and pass thread from right
to left through one of the holes at its end. Pull thread into slots at left
of thread guides 5 and 6 and then into the stot at left of needle clamp 7.
Then thread needle, front to back. The automatic needle threader will
do this for you easily and quickly.
14