R 7086
Chaqinfy th $win9 9ôôe
Lift both needle and presser bars to their highest positions
and turn the sewing foot thumb screw to the left. Tilt the foot
sideways and pull it down. Slip on new foot and tighten the
screw securely.
.4
Remove the sewing foot. Attach darning foot from the rear.
Hold spring clip n so that it is behind the needle set screw, and
tighten screw c. Attach darning hook d as illustrated so that
when you lower presser bar lifter e, the darning foot will stay
in position. Remember to lower presser bar lifter e so that the
upper tension is activated.
22
R
8005
R 8147