The Transverse Spoolholder; All-Purpose Sewing Foot - Pfaff Automatic 362 Instruction Book

The Transverse Spool Holder
To ensure that the thread will unwind evenly from a cross-wound spool, use
the transverse spool holder. You can buy the transverse spool holder from your
Pfoff dealer.
To attach the spool holder, slip position spring I over the vertical spool pin,
the bent portion of the spring pointing toward you. Push the spool of thread
on spool pin 2. Press the position spring together, and push pin 2 into the spring
slot. With the spring pressed together, adjust its position on the vertical spool
pin, as required. When you release the spring, the transverse pin will be held
in place firmly. Pass the thread through eyelet 3, and thread the machine as
instructed.
All-Purpose Sewing Foot (with Clear-View Shoe)
All-purpose sewing foot No. 51991 is attached as instructed on page 24.
The transparency of its shoe facilitates all sewing operations where it is important to watch the needle
penetrate the fabric.
Special application possibilities are discussed on the preceding pages.
Sewing feet and attachments which are not included in the accessory box of your sewing machine can be obtained from your
Pfaff dealer.
R 6533
56