44088
Inserting Patches with the Elastic Seam
(especially on elastic materials)
Machine Setting:
Dial A=0
Lever B= 4
Dial C=3
Dial D=8
Lever E=1
Stitch length control between 0.2 and 0.6 (see also page 53)
Inserting Patches with Zigzag Stitches
(especially on non-elastic materials)
Machine Setting:
Dial A=4
Lever B= 4
Dial C=0
Lever E=0
Stitch length control about 0.5
Large holes can be patched quickly. Cut patch so that its grain will match
the rest of
the fabric. Place the patch over the damaged area.
Now you begin to oversew the raw edges with the elastic seam or the
zigzag seam.
For additional strength, stitch over corners twice. Turn over and trim close
to seams.
Also the zigzag seam forms an elastic juncture between the material and
the patch.
R 7156
39
R7157