Darning Without Foot - Pfaff Automatic 362 Instruction Book

Machine Setting:
Stitch width dial A=2
Needle position lever B= 4
Attach darning foot, as instructed on page 24, drop machine feed, and lower presser
bar lifter. Since your machine is fitted with a vibrator, there is no need to place the
fabric into darning hoops. Simply guide it under the needle free-hand.
For darning woolen socks, pullovers and other woolen articles on the free darning
arm, use a filler thread the some color as the article to be darned. Lace filler thread
through the hole in the foot. Place thread bock and forth across damaged spot and
anchor it in unworn area. Sew across filler thread with zigzag stitches.
Darning without Foot
Machine Setting:
Stitch width dial A=0
Needle position lever B= 4
Place fabric into darning hoops.
This technique is used primarily to darn small holes in delicate fabrics, such as nylon.
You can buy the cover plate Na. 60407 at your Pfaffdealer .
53670
Darning Woolen Articles
R 6121
Prepare your machine for darning
as follows:
Remove
presser foot and drop
machine feed. Use feed cover plate
No. 60407 to increase tautness of
fabric in hoops and permit free
movement. To fasten the feed plate
to the machine, slip its finger into
the hole in the front edge of the
needle plate.
R
6067
50