Pintuck Foot With Decorative Stitch Guide, 9 Mm; Non-Stick Foot With Idt; Stitch Length - Pfaff perfomance 2054 Manual

Hide thumbs Also See for perfomance 2054:
Table of Contents

Advertisement

Pintuck Foot with Decorative Stitch Guide, 9 mm
With this foot you can accurately sew pintucks with a spacing of 5
or 11
mm.
The same foot allows you to precisely space decorative
stitches up to 9 mm wide between the pintucks.
Snap on the pintuck foot with guide. The foot can be snapped
on with the guide pointing to the left or the right (turn foot
around
1800).
Insert a twin needle (1.6 or 2 mm space between needles).
Thread the two needles. Set the needle thread tension tight
(4
-
5) and sew one pintuck with or without gimp thread.
Place the first pintuck under the groove in the extended guide.
Sew a second pintuck. The second pintuck will automatically
be spaced to allow a decorative stitch to be sewn in the area
between pintucks.
Sew all remaining pintucks.
Replace the twin needles with a normal sewing needle.
Set the needle thread tension to 3.
Place stabilizer under sewing area.
Place two pintucks in the guides on either side of the center
of the foot. Embroider your desired decorative stitches in this
space.
Note: Use the Pintuck Foot with Decorative Stitch Guide, 6mm for smaller
decorative stitches up to 6mm.
Non-stick Foot with IDT
The synthetic coating on the underside of this foot makes it
particularly suitable for sewing decorative and utility stitches
up to 6 mm wide on leather, synthetic leather and vinyl. It may
be helpful to back these fabrics with a fusible woven or knit
interfacing. Due to the stretch of these fabrics, it is important to
use a stabilizer under the fabric when sewing. A needle with a
longer eye (system 130 N) is recommended for thicker leather. On
softer leathers an embroidery needle works well.
Snap on non-stick decorative stitch foot.
Stitch leather as desired.
Remove stabilizer.
WARNING! Carefuly set stitch, i.e. soort stitch length/tight stitch
density, may cause leathers, synthetic leathers and vinyl's to
perforate. It is important to remember that needle piercing points
Non-stick Foot with DI
820240 096
will remain visible in leather. Practice on scraps first.
Stitch: optonaI
820225-096
Pintuck Foot with Decorative
Stitch Guide, 9
mm
Stitch: 1
Stitch length: 15
Tension: 3-5
106

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents