Threading The Needle Thread - Pfaff creative 7560 Instruction Book

Switch off the master switch. Raise the sewing
foot lifter (23) and turn the hand-wheel until the
take-up lever (33) has reached its highest
position. Place the thread on the reel holder (36)
and fit a corresponding unwinding disk.
Now pull the thread into guide A. Then pass the
thread to the right or left along thread tension
disk B and downwards through the left-hand
threading slot (30). Pull the thread around stop E
into the right-hand threading slot and upwards
to the take-up lever (33).The thread must be
pulled into the take-up lever from left to right
and downwards again in the right-hand threading
Finally, pass the thread from the side behind one
of the two thread guides (28).
Threading the needle is described on the
following page.
Threading the needle thread
—A
slot.
I
E
23