Hook Cover; Taking Out The Bobbin Case; Thread Tension - Pfaff creative 7560 Instruction Book

Switch off the master switch.
Hold the hook cover (49) at the side and open it
towards the front.
Lift the latch of the bobbin case and pull the
bobbin case out. Release the latch and take out
the empty bobbin.
To obtain optimum seam appearance and durability, make sure needle and bobbin thread tensions are
correctly adjusted to each other; i.e. the threads are interlaced between the two fabric layers.
For ornamental seams and buttonholes, the thread interlace should be visible on the reverse side of
the fabric.
To correct the bobbin thread tension turn the adjusting screw very slightly to the right, using your
finger, i.e. turn it to the left to loosen, or turn it to the right to tighten.
Hook cover
Taking out the bobbin case
Thread tension
21