Spool Holder; Thread Net; Thread Unreeling Disc - Pfaff coverlock 4852 Owner's Manual

Spool holder

Before placing thread cones/spools on
machine you must pull the spool holder 34
fully away from the back of machine.

Thread net

Synthetic threads generally unwind too
quickly from the thread spool. Thread nets
have been included to allow easy use of
these threads. Pull the thread net (located
in the accessory box) over the spool from
below. Place the spool on the spool holder
catching the bottom of the thread net with
the spool pin.
Telescopic thread guide
Pull the telescopic thread guide 32 upwards
to its highest position.
To ensure optimum thread feed, turn the
telescopic parts slowly until you hear the
locking balls fl ick into place.

Thread unreeling disc

The thread unreeling disc (in the accessory
box) is used for small spools/spools with
notched or rough ends. Place the spool on
the spool pin 35. Place the thread unreeling
disc on top of the spool. Make sure the spool
dise 37 is used under the spool.
11 11