Getting Started
Turning a corner
1. Stop the machine a few
stitches before the end of
the seam.
2. Press the Needle Up/Down
button a few times until the
needle falls on the end of
the seam.
3. Raise the presser foot.
4. Pivot the fabric around the
needle to change the sewing
direction.
5. Lower the presser foot and
continue sewing in the new
direction.
Using the Fabric Guide
1. Attach the fabric guide to
the attachment hole with
the screw.
2. Adjust the position of the
fabric guide and tighten the
screw.
3. Place the fabric with its
edge against the fabric
guide.
4. Lower the presser foot and
start to sew.
29