Idt™ System (Integrated Dual Feed); Changing Needle Plate - Pfaff creative sensation Owner's Manual

IDT™ system (Integrated dual feed)
For sewing any fabric precisely PFAFF® creative
sensation™ sewing and embroidery machine
provides the ideal solution: the integrated dual feed,
IDT™ system. As on industrial machines, the IDT™
system feeds the fabric from the top and bottom
at the same time. The material is fed precisely,
eliminating puckering on seams in light weight
fabrics such as silk and rayon. The dual feed action
of the IDT™ system prevents layers from shifting
while sewing, keeping quilt layers aligned and
ensuring a more perfect match when sewing plaid
or striped fabrics.
Engaging the IDT™ system
Important: For all work with the IDT™ system use
presser feet with the center back cut-out.
Raise the presser foot. Press the IDT™ system down
until it engages.
Disengaging the IDT™ system
Raise the presser foot. Hold the IDT™ system with
two ngers at the ribbed ankle. Pull the IDT™
system down, then pull it away from you to release
the IDT™ system slowly upward.

Changing needle plate

Remove the presser foot and slide off the bobbin
cover. Place the screwdriver under the needle
plate as shown in the picture and gently turn the
screwdriver to pop off the needle plate.
To replace the needle plate, lower the feed dogs and
position the needle plate so that the knob on the
A
underside of the plate ts into the notch at the back
(A). Press the needle plate down until it clicks into
place.
2:9