Inserting The Bobbin; Idt™ System (Integrated Dual Feed) - Pfaff passport 2.0 Owner's Manual

Inserting the bobbin

Make sure that the needle is fully raised and the
1. Insert the bobbin in the bobbin case with the
thread running in a counterclockwise direction.
draw the thread at the arrow markings into the
4. Pull the thread at the arrow markings into the
IDT™ system (integrated dual
feed)
passport™ 2.0
solution: the integrated dual feed, IDT™
on industrial machines, the IDT™ system feeds the
fabric from the top and bottom at the same time.
perfect matching of checked and striped fabrics.
The IDT™
Engaging the IDT™ system
Raise the presser foot. Press the IDT™ system down
until it engages.
Disengaging the IDT™ system
Raise the presser foot. Hold the IDT™ system with
system down, then pull it away from you to release
the IDT™ system slowly upward.
IDT™ system, use
IDT™
1
B
3
D
E
2
A
4
C
F
15