Shape Creator - Pfaff creative sensation Owner's Manual

Shape Creator (27)

Shaping is a unique way to use your beautiful
built-in decorative stitches, sequences or even
embroidery designs to form new shapes.
Shape Creator overview
A Shape menu
B Select shape
C Zoom
D Delete/Duplicate last object
E Enter number of designs
F Select control points
G Select spacing
H Select line positioning
I Select side positioning
J Select design angle
K Create appliqué
L Control points
M Baseline
Note: Duplicate/delete and enter number of designs
are not available when shaping an embroidery text.
If shaping text, you can use embroidery text editor to
adjust your text while shaping. Read more on page 8:20.
Select shape (A and B)
Open a tab at the top (A) and select a shape by
touching it in the list (B).
The stitches or designs will be placed along the
baseline (M) in the order that they were loaded
into Embroidery edit. The stitches or designs will
follow the line in the direction indicated by a small
arrow in the icons in the select shape list.
Note: When selecting a new shape, all your custom
adjustments to the shape will be set to default.
Delete/Duplicate last object (D)
If you want to delete the last object in the shape,
touch the - icon. Only the last object in the shape
will be deleted.
If you want to add a copy of the last object, use
the + icon. The last object in the shape will be
duplicated and the copy will be added after the
last object on the baseline.
Note: If several designs are grouped before opening
Shape Creator, the whole group will be duplicated or
deleted.
8:12
L
L
C
F G
H I J K
If there are too many objects in the shape, the
baseline will be red. Enlarge the shape or delete
some objects until the objects t in the shape. The
baseline will change to black again.
Enter number of designs
Touch the enter number of designs icon (E) to get
a pop-up where you can enter the desired total
number of designs to be used in the shape.
A
M
3
D E
B